1.0 Network Infrastructure and Connectivity
Subnetting Practice Questions
VLSM, subnet math, and host/network calculations.
Author-reviewed by LabFabric · 6 September 2026 · Report a content issue
One solved question, so you can see how these are marked
How many usable host addresses does a /27 subnet provide?
30
A /27 leaves 5 host bits, giving 32 total addresses. Subtracting the network and broadcast addresses leaves 30 usable host addresses.
Every question in the set below is marked like this. The answers stay hidden until you pick one.
Find related practice in the CCNA pathAll 9 Subnetting questions in this set
Answers and explanations appear when you work through the set above.
What is the subnet mask for a /20 network in dotted decimal?
- 255.255.240.0
- 255.255.224.0
- 255.255.248.0
- 255.255.192.0
Given the network 192.168.10.64/26, what is the broadcast address?
- 192.168.10.127
- 192.168.10.95
- 192.168.10.126
- 192.168.10.191
A network engineer needs at least 500 usable IPv4 host addresses on a single subnet. Which prefix gives the smallest address block that satisfies this requirement?
- /23
- /24
- /22
- /25
What is the wildcard mask that corresponds to a /28 subnet mask, as would be used in an access control list or OSPF network statement?
- 0.0.0.15
- 0.0.0.31
- 0.0.0.7
- 0.0.0.255
An address of 172.16.50.10 with a /21 mask belongs to which subnet?
- 172.16.48.0/21
- 172.16.50.0/21
- 172.16.40.0/21
- 172.16.56.0/21
A company needs to subnet 10.10.0.0/16 using VLSM to support one subnet of 500 hosts, one of 100 hosts, and one of 20 hosts, all as small as possible. Which prefix length correctly fits the 100-host subnet?
- /25
- /24
- /26
- /23
Which of the following correctly identifies the first usable host address in the subnet 192.168.5.32/28?
- 192.168.5.33
- 192.168.5.32
- 192.168.5.34
- 192.168.5.31
A router interface is configured with IP address 10.20.30.65 and mask 255.255.255.192. Which subnet does this address belong to?
- 10.20.30.64/26
- 10.20.30.0/26
- 10.20.30.128/26
- 10.20.30.32/26
Two routers supporting RFC 3021 use a point-to-point IPv4 link needing exactly two endpoint addresses. Which prefix uses the fewest addresses?
- /30
- /29
- /28
- /31