Know what your practice covers.

This map links related resources to every objective and lettered subobjective in the CCNA 200-301 v2.0 blueprint, which takes effect 3 February 2027 (v1.1 stays current until 2 February 2027). The Change column shows how each objective differs from v1.1, so you can see exactly what v2.0 added. A link means there is relevant practice, not that every subtopic has been fully taught or assessed. Continue to use your course or book for the complete syllabus.

Read Cisco’s full objectives, including subtopics

Depth still matters

The wireless exercise models a WPA2 client connection, not every controller setting. The configuration workbench uses a small IPv4 topology, not a full IOS image. Related IPv6, NAT and OSPF labs cover specific faults. EIGRP, multi-area routing, VTP, and NTP configuration are no longer itemised in v2.0 and are kept as extension practice. Several v2.0 objectives are assessed here through recall questions first, and hands-on labs are still being added for them.

CCNA objectives and related practice resources
Objective	Study area	Versus v1.1	Recall	Applied practice
1.1	Cable and interface diagnostics	Updated	Related questions	Open practice
1.2	Hypervisors, VMs and containers	Updated	Related questions	Use your course for application
1.3	IPv4 addressing troubleshooting	Updated	Related questions	Open practice
1.4	IPv6 addressing troubleshooting	Updated	Related questions	Open practice
1.5	Wireless principles	Updated	Related questions	Open practice
1.5.a	Band and channel selection	Updated	Related questions	Open practice
1.5.b	RF characteristics	Updated	Related questions	Use your course for application
1.5.c	Wireless security protocols	Updated	Related questions	Open practice
1.5.d	Causes of interference	Updated	Related questions	Use your course for application
1.6	Wired and wireless client troubleshooting	New in v2.0	Related questions	Open practice
1.7	DHCPv4 client, server and relay troubleshooting	Updated	Related questions	Open practice
2.1	Switch-to-switch and switch-to-router connectivity	Unchanged	Related questions	Open practice
2.1.a	Layer 2 and Layer 3 physical interfaces	Unchanged	Related questions	Open practice
2.1.b	802.1Q trunk interfaces	Unchanged	Related questions	Open practice
2.1.c	LACP port-channel and EtherChannel	Unchanged	Related questions	Open practice
2.1.d	Switch virtual interface (SVI)	Unchanged	Related questions	Open practice
2.2	Edge-host port attributes	Updated	Related questions	Open practice
2.2.a	Desktop, printer and IoT appliances	Updated	Related questions	Use your course for application
2.2.b	Standalone and controller-based access points	Updated	Related questions	Open practice
2.2.c	Voice over IP phone	Updated	Related questions	Open practice
2.2.d	Virtualized hosts	Updated	Related questions	Use your course for application
2.2.e	Network appliances	Updated	Related questions	Use your course for application
2.3	CDP and LLDP documentation checks	Unchanged	Related questions	Open practice
2.4	Layer 2 and Layer 3 troubleshooting with show, ping, traceroute and capture	New in v2.0	Related questions	Open practice
2.5	Rapid PVST+	Updated	Related questions	Open practice
2.5.a	Root port, root bridge and port names	Updated	Related questions	Open practice
2.5.b	Port states and roles	Updated	Related questions	Open practice
2.5.c	PortFast	Updated	Related questions	Open practice
2.5.d	Root guard, loop guard and BPDU guard	Updated	Related questions	Open practice
3.1	Reading the routing table	Unchanged	Related questions	Open practice
3.2	IPv4 and IPv6 static routing	Unchanged	Related questions	Open practice
3.2.a	Default route	Unchanged	Related questions	Open practice
3.2.b	Network route	Unchanged	Related questions	Open practice
3.2.c	Host route	Unchanged	Related questions	Open practice
3.2.d	Floating static route	Unchanged	Related questions	Open practice
3.3	Single-area OSPFv2 and OSPFv3	Updated	Related questions	Open practice
3.3.a	Neighbor adjacencies	Unchanged	Related questions	Open practice
3.3.b	Point-to-point networks	Updated	Related questions	Use your course for application
3.3.c	Broadcast networks and DR/BDR selection	Unchanged	Related questions	Open practice
3.3.d	Router ID	Unchanged	Related questions	Open practice
3.4	HSRP and VRRP operational status	Updated	Related questions	Open practice
4.1	Local usernames and AAA (TACACS+ and RADIUS)	Updated	Related questions	Open practice
4.2	SFTP and SCP file transfer	New in v2.0	Related questions	Open practice
4.3	NAT and PAT on IOS XE	Unchanged	Related questions	Open practice
4.4	DNS record diagnosis	New in v2.0	Related questions	Open practice
4.5	IPsec remote access and site-to-site VPNs	Updated	Related questions	Use your course for application
4.6	IPv4 access control lists	Unchanged	Related questions	Open practice
4.7	Layer 2 security features	Updated	Related questions	Open practice
4.7.a	DHCP snooping	Unchanged	Related questions	Open practice
4.7.b	Dynamic ARP inspection	Unchanged	Related questions	Open practice
4.7.c	Storm control	New in v2.0	Related questions	Open practice
4.7.d	RA guard	New in v2.0	Related questions	Open practice
4.7.e	Port security	Unchanged	Related questions	Open practice
5.1	Role of agentic AI in network operations	New in v2.0	Related questions	Use your course for application
5.2	Prompts for generative AI in network operations	New in v2.0	Related questions	Use your course for application
5.3	Network management approaches	Updated	Related questions	Use your course for application
5.4	Function of SNMP	Unchanged	Related questions	Open practice
5.5	Ansible for command execution	Updated	Related questions	Open practice
5.6	Syslog content, severity levels and facilities	Updated	Related questions	Open practice

Maintained by LabFabric. This mapping is not an independent technical certification or a pass guarantee. Report a missing or incorrect mapping with the objective number.